Alphane Moon@lemmy.worldM to Hardware@lemmy.worldEnglish · 2 days agoResearchers embed digital 'fingerprints' into 3D printed parts — tech may make future ghost guns more traceablewww.tomshardware.comexternal-linkmessage-square32fedilinkarrow-up173arrow-down18cross-posted to: [email protected]
arrow-up165arrow-down1external-linkResearchers embed digital 'fingerprints' into 3D printed parts — tech may make future ghost guns more traceablewww.tomshardware.comAlphane Moon@lemmy.worldM to Hardware@lemmy.worldEnglish · 2 days agomessage-square32fedilinkcross-posted to: [email protected]
minus-squareBlue_Morpho@lemmy.worldlinkfedilinkEnglisharrow-up15arrow-down1·2 days agoI assume they add a custom wiggle to the print head so the “serial” is embedded into the plastic everywhere inside and out.
minus-squareBotsRuinedEverything@lemmy.worldlinkfedilinkEnglisharrow-up2arrow-down5·2 days agoExactly. So if that wiggle gets sanded off you have effectively anonymized your part
minus-squareBlue_Morpho@lemmy.worldlinkfedilinkEnglisharrow-up7·1 day agoThe wiggle isn’t only on the surface. I’d bet it is everywhere except for the surface or users would complain about defects. So if you sand the surface, the forensics slices it in half and reads the wiggle that is embedded everywhere inside.
minus-squareBotsRuinedEverything@lemmy.worldlinkfedilinkEnglisharrow-up4·1 day agoHa. I’ll bet you’re 100% correct.
minus-squareBjörn Tantau@swg-empire.delinkfedilinkEnglisharrow-up3arrow-down1·1 day agoWhen the wiggle is inside the part the part will be gone after sanding it off.
I assume they add a custom wiggle to the print head so the “serial” is embedded into the plastic everywhere inside and out.
Exactly. So if that wiggle gets sanded off you have effectively anonymized your part
The wiggle isn’t only on the surface. I’d bet it is everywhere except for the surface or users would complain about defects. So if you sand the surface, the forensics slices it in half and reads the wiggle that is embedded everywhere inside.
Ha. I’ll bet you’re 100% correct.
When the wiggle is inside the part the part will be gone after sanding it off.