So I have a bambulab A1 and recently wanted to print something with TPU. The issue I have however is that the extrusion is just hella inconsistent. I get a coupel seconds of normal extrusion and then a couple seconds of pretty much none. The first layer was only half filled when I checked and I want to know if you guys have any suggestions.
I used the base preset for generic TPU.
This is the first layer I get after trying a couple different presets. Better than before but still horrible.
Maybe try with these settings (found elsewhere) : https://imgur.com/a/vGV9DV0
It seems like it’s the default TPU settings with these tweaks :
Thanks. I’ll try this if the manufacturer preset turns out to not work