Frankly, a few dozen passes with 120-220 grit, (with the grain) followed by a quick acetone wipe down (picks up any particulate) and then a couple light coats of gloss varnish (spray; 8-10" away, just enough to begin saturating the surface) varnish before waiting 24hrs+ (ie. gas off) to box it up… is the pro move here. 🫶🏼🤓
Clear coat it or the layer lines will pick up all the gamer gunk(dead skin and oils).
Frankly, a few dozen passes with 120-220 grit, (with the grain) followed by a quick acetone wipe down (picks up any particulate) and then a couple light coats of gloss varnish (spray; 8-10" away, just enough to begin saturating the surface) varnish before waiting 24hrs+ (ie. gas off) to box it up… is the pro move here. 🫶🏼🤓
I try and avoid sanding plastic as much as possible even if it’s PLA
I’ve never tried it but this method looks interesting. I wonder if it would work with clear primer instead of paint.
https://www.instructables.com/Easy-Way-to-Smooth-PLA-No-Sanding-No-Chemicals/