If you wanna print it yourself, the model is here: https://www.printables.com/model/1348194-4n-threaded-flat-head-screws-and-nuts-10-32-equiva

Design to be a drop in replacement for 10-32 screws with a much, much higher pitch. These screws are extremely easy to print, is reliable enough that it can hold some weight.

If you wanna print this yourself, you need to make sure that the screw is sideways, so if it breaks it’s no on the layer lines.

Using them in my own prints which had metal screws and they are holding quiet well.

  • GreenKnight23@lemmy.worldEnglish
    163·
    2 days ago

    fuck slotted.

    fuck fuck fuck fuck slotted.

    fuck slotted all the way back to 1513 and the first clock maker who released those accursed damnable screws on humanity.

    I would rather gouge out my fingernails and toenails with a dull spoon than have to suffer through another slotted screw that’s somehow worse than normal slotted screws.

    fuck. slotted. screws.

    • Onomatopoeia@lemmy.cafeEnglish
      8·
      1 day ago

      Wish I could upvote you more.

      Any time I take out a slotted screw, I throw the fucker away and replace with (preferably) torx, but I’ll settle for Phillips.

    • Bluewing@lemmy.worldEnglish
      12·
      1 day ago

      Meh, slotted screws get used a lot. What most people don’t get is the reason they have problems with slotted screw heads is because they don’t use a proper fitted driver that fits the slot correctly. You always try to use an undersized driver and are then shocked to discover you have problems.

      Don’t blame the tool for your poor choices. Use the properly fitted tool for the job.

      • filcuk@lemmy.zipEnglish
        41·
        22 hours ago

        Slotted only have two points of contact, which is part of what makes them so easy to strip.
        Most other fasteners have double that as a minimum.
        Slotted are also generally used in old-fashioned furniture only where I live, and those tend to be very shallow for aesthetic or historical reasons, making the problem even worse.

        • Bluewing@lemmy.worldEnglish
          3·
          20 hours ago

          A properly fitted straight bladed screw driver will fit snugly in the slot along it’s entire length. This offers more than the ‘two points of contact’ that your poorly chosen screw driver does. Add a hollow ground blade, they get an amazingly powerful grip. Learn to fit a screw driver properly and you will seldom have a problem with a slotted screw. As toolmakers and high end gunsmiths know and you don’t.

          Of course, if you have neither the skill or enough ambition to be bothered to ensure the tool fits the fasteners correctly, you probably should choose a more foolproof tool and fastener.

          • filcuk@lemmy.zipEnglish
            3·
            17 hours ago

            skill or ambition to ensure the tool fits

            Do I look like a rocket surgeon