I mean, it doesn’t have to be, but printing upgrades for your printer is part of the fun. But my job does have a maker space I could use.
Honestly the calibration would only take an hour or so, I just have to get around to it. The longest part will be setting up Klipper on my pi4 to replace the less powerful ODROID I’m currently using, because I plan on starting from scratch with the config.
Must the magnetic z-stop mount be printed on your machine specifically?
If yes; do a calibration step or two each week and you’ll be done by xmas
If no; print one at a local makerspace/public library then do a calibration step or two each week and you’ll be done by Thanksgiving!
I mean, it doesn’t have to be, but printing upgrades for your printer is part of the fun. But my job does have a maker space I could use.
Honestly the calibration would only take an hour or so, I just have to get around to it. The longest part will be setting up Klipper on my pi4 to replace the less powerful ODROID I’m currently using, because I plan on starting from scratch with the config.