I needed another corded mouse and this time around I thought of @[email protected] and @[email protected] instead of Logitech’s shareholders. These guys make open source mice among other open source hardware under the brand Ploopy. You can order one from them, assembled or as a kit, or you could print and build it entirely by yourself.
The mouse itself is pretty great. Coming from a long line of Logitech (MX518/G5/G500/G502), it’s a bit larger than what I’m used to but I think I’m getting accustomed to it.
Here’s another shot of it:
I hope someone makes something like this that looks just like IO1.1
Now do printers.
pretty stupid that we can print in 3 dimensions well, while 2-dimension remains locked behind capitalism.
I have written a more detailed comment on it before, but 2d printing is much more technically complicated than 3D printing, and the resolution is literally an order of magnitude difference (0.2mm vs <42um) and the printer has to print full color on any surface with microdots in a very very short time. People would throw the printer out if it took 10 minutes for a single paper like a large first layer takes in 3D printing.
Yes please!
I’ve got to say “Ploopy” is one of the absolute worst names I’ve ever seen. Before I even saw the picture, I thought “I bet it looks like shit.”
Ploopy fills my hand really well
It’s like an alien name out of Rick and Morty. 😂
you mean you dont like my plumbus? what about glorp?
it gives me a general “its probably entirely shit”. that’s really a bad name.
After reading up it sounds like a decent product but they should definitely consider rebranding.
I bought a Ploopy Thumb a few years ago. I assembled it myself, and was pleasantly surprised at how easy it was (when actually following the instructions).
The small button on the right has broken twice, which wasn’t a problem because I just downloaded the stl file and reprinted the button assembly.
I wanted horizontal scrolling, so I used QMK to make the trackball a scroll wheel when the right side button is pressed (that may explain the faster button wear). It was surprisingly easy, and there was even a comment in the source code pointing out which line I should modify for horizontal scrolling support. I guess they expected people to want this feature.
The price is high, but I don’t expect to buy another mouse unless my needs change. The open source hardware and software is excellent, making repairability 10/10. The edges of the buttons are slightly rough, but I have the 3d printing files, so I get to choose what material it’s made of and what post processing / smoothing is used. It hasn’t bothered me enough to do anything about it.
While I can’t recommend a trackball mouse to anyone, I can recommend Ploopy. It’s one of the few products that I feel like I actually own.
How do you use a trackball mouse? Does moving the mouse and moving the trackball both move the pointer? Or one moves the pointer and the other does something else?
The mouse stays in one location with grippy feet and the trackball moves the cursor. There is no sensor for mouse movement. It does take a while to get used to.
The reason I chose it was that I didn’t have enough desk space to move a mouse. I barely even had enough space to put the mouse. Now that I’ve moved house, I just like the novelty. It’s not as accurate as a regular mouse.
I would love a mouse that could do both regular movement and trackball movement so I could have 4 axis inputs. Sadly, I haven’t found any like that.
What I really want is this, but with a trackpad instead of a trackball.
They do have a trackpad, but not in this shape.
I was surprised when I started using the Steamdeck. The Steamdeck’s trackpad felt almost identical to my trackball mouse, and it took effectively no time to get used to it.
The advantage of a trackball over a trackpad is that you can spin the ball for high movement speed, then stop it after a set time for fairly accurate distance. A trackball (or trackpad) will never be as accurate as a regular moue, but it is surprisingly usable (after a few months or practice).
I’ve used several trackballs, but they have all been seriously uncomfortable for me and my specific brand of RSI. My current “mouse” is a Steam Controller, but using it one-handed isn’t great due to the uneven weight distribution. I also have much better accuracy using a trackpad vs a trackball.
Ideally, I just want a Steam Controller cut in half with a more confortable grip that doesn’t dig into my palm.
How’d you make the surface this smooth?
Overuse and poor lighting.
I know some people have used an acetone vapor bath with ABS prints. I’ve never looked into what works with PLA.
Just to save the heartache, acetone vapor does not work with pla.
LOL, makes sense. I’m considering using epoxy. Seems like there’s a product that can be brushed on. It fills the gaps. Can be painted if desired.
I’d be interested to see how well it works.
I’ll try to remember to post if I end up doing it.
Is it comfortable in the hand? The surface looks super rough
Looks like a bitch to clean. Gonna get all sorts of grease collecting in those grooves…
All Ploopy’s stuff looks rough. I think they’re 3D-printing them. Maybe one day they’ll progress to something that gives a nicer result.
I was looking at their trackballs but the ambidextrous ones look awkwardly tiny and have rattly bearings, in addition to the rough finish. I support what they’re doing but I wish the products were a bit less prototypey.
I think they’re 3D-printing them. Maybe one day they’ll progress to something that gives a nicer result
Yes they are 3D printed
Poorly 3D printed.
The layering issue could be solved by orienting the object at a 45° angle
Or even smaller layer height. That looks like .2 or .24 minimum.
I could reprint the housing one day, when I get a printer myself. 😂
Yeah, definitely 3D printed.
It looks rough, but it’s actually fairly comfortable.The only bit that bothered me was the edge of one of the buttons, and a nail file fixed that in seconds.
Theoretically, you can mold it to fit your hand but the tolerances and mountings make that a hassle.
As for the print itself? Most people just do a quick print and have the telltale ridges from layers. But you can futz with settings to improve the smoothness or just finish the print itself. At which point it is not going to be as smooth as injection molding but it will be more “different” than “bad”.
It feels good. I’m thinking of smoothing it with epoxy but it’s not necessary.
its 3d printed so it has layer lines. it can be improved or processed to be smoother though.
Only as good as your 3d printer and settings I’d say
Layer lines, too expensive.
Looks less comfortable than one of those 10~15€ brandless mouses at MediaMarkt
layer lines can be sanded down during making and/or improved upon massively if you are fine with it taking much longer to print. or own a better printer.
the price is steep, but its pre-made and post processed. i think the real value of it is in making it yourself for the price of the components and raw plastic if you already own a printer.
deleted by creator
sadly don’t have one near. but its a good idea too.
Layer lines
You say “free hand grip for less strain” weird.
What is your experience with the scroll wheel? Some time ago I was interessted in a Ploopy but the non clicky scrollwheel put me off.
My scroll wheel was very stiff and irritating at first. It did loosen over time and is now completely useable. It doesn’t free-spin, but it also doesn’t take a lot of force to move.
The lack of clicking is a little disconcerting, but not a deal-breaker for me. I guess you could add an extra part to make it click — like putting a playing card in the spokes of a bicycle wheel.
Because I bought the trackball mouse, I changed the trackball to scroll when a button is held. I now have horizontal and vertical scrolling, and don’t use the scroll wheel except for middle clicking.
It’s alright. It’s not as nice as the flywheel/clickwheel on G502 but it’s alright. It doesn’t accidentally spin for me so far. I imagine one of the custom buttons could be used to enable/disable scrolling along with some script, if it becomes a problem.
No left hand options 😪
Just turn the printer upside down, dummy!
Most slicers allow you to mirror parts very easily
The PCB doesn’t look ambidextrous. Maybe there’s a way to mirror that too but it’s probably not as easy. And you’d have to get it custom built.
Ohh OK, yeah that would be tricky unless you’re an EE
Ah great! My hands are big and all the mouses I tried are all too small. And it’s giving me rsi. Hopefully this will help me. I theory I can just potentially print my own mouse design that finally fit my hands?
RSI is caused by repetitive motions. No mouse can help that. Look at exercise to combat RSI.
I have carpel tunnel syndrome on my right hand after using mice for dozens of years. It became so painful I learned to use a computer mouse with my left hand.
That worked for years until I squeezed a couple dozen lemons my neighbor gave me. Of course I used my right hand. Had pain I cannot describe, I could not function. The doctor had shoot cortisone into my wrist.
PROTECT YOUR WRIST
The PCB has electrical buttons permanently attached. The 3D printed parts have protrusions that touch the buttons.
You could possibly redesign the 3D printed parts only, but at some size increase you may need to start looking into redesigning the PCB.The good news is that the mouse itself is bigger than the picture makes it seem. You might actually be OK without modifications.
If you do want to give it a try, I highly recommend buying the kit and fully assembling it yourself. That way you know that it works, and you have a solid foundation to apply the modifications to.
Good point. It measures at about 13x8.5cm.
You probably can modify the existing one to fit your hand fairly easily.
I keep thinking I should give a ploopy a shot but I’ve increasingly grown to like/need vertical mice and, like most ploopy related efforts, it is mostly “you CAN do it” with nobody ever having even tried because it requires pretty hefty redesigns of almost every part to mount things correctly.
I want one
You need plastic that is more resistant to contact so that you don’t end up covering your hand in microplastics. That material looks like questionable recycled plastics.
I’m also not giving up on wireless. I’d rather have an only bluetooth (slow?) mouse than a wired one.
All the 3d printed parts have files available online. You can 3d print new parts using any material you want.
As far as I’m aware, PLA is mostly safe, but every company has different proprietary additives.
Something plant based like cellulose would be nice. Longevity wouldn’t be a concern with how easy it is to reprint and reassemble.
Wireless would be nice.
Or titanium? But that would probably require midifications of the bendy bits to keep them flexible. 😂
I do agree with you. Except for the Bluetooth. Those mouses always need batteries and are empty and the mouse too heavy.
I’m not sure what makes it seem recycled, seems like a reasonably fine print to me. I believe it’s printed in PLA which personally I’d want to see PETG but that’s more for long-term durability than microplastic concerns, which I can’t speak to.
How do you like the mouse? I got their trackpad and it’s pretty good. I’m thinking about replacing my old Mx Master with their mouse.
I like it. The surface finish is obviously not as nice as the Logitech, but I like it. I’d probably like it better if it were smooth, which I might try achieving with some epoxy paint. The button feel is great. Better than my G502. Tracking is stellar. The shape is comfortable. The infinite/togglable scroll wheel on the G502 is sonething I wish it had but I can live without it. There’s also that special feeling, that someone decent made it, and that it can be infinitely repaired. If it’s not a stretch money-wise for you - get one. In the worst case scebario your money would have gone supporting open source hardware.
These jokers are charging $130CAD for a mouse, what in the fuck
“These jokers” are giving the files and documentation away for free. They’re charging for the cost of putting together a kit so you can build one without thinking or understanding anything. If you want it for cheap, self source and DIY, that’s the whole point, that’s why the files are free.
How much should it be? It uses a great sensor, Omron main switches, it’s built by two guys in Toronto, Canada where rent isn’t cheap. There’re definitely cheaper massproduced mice that don’t share IP for free. This isn’t that.
You don’t need to pay them anything.
You can just download all the files they’ve made available and build one yourself. The electronics have full schematics so you can either make it yourself or send the schematics to a PCB company. The shell is entirely 3d printed. All extra hardware is readily available.
If that sounds like a lot of work, maybe it’s worth paying the person who created it and is offering to do all that work for you.
It’s hand crafted, they probably barely breakeven.
Go ask Logitech if they will share blueprints or spend 0.10$ extra for a button that survives more than 100’000 clicks
I have a Logitech from 2003 or so. The feet are gone. The plastic under the feet is rubbed rmooth. The Omron switches are still great, no failure symptoms. Meanwhile I replaced a G500 after couple of years of use due to a switch developing “double-click” from wear. The reason I needed another wired mouse now is that another Logitech developed double-clicking. So yeah, exactly.
I had 2 Logitech m570s fail on me before I bought the Ploopy Thumb. So far it’s lasted longer than either Logitech mouse, and looks like it will manage to be my longest surviving mouse.
I have a 2 year old MX Master 3S, the left click button can’t dragndrop anymore without dropping, unless you press really hard on it.
Also I can’t rebind the buttons without having Logitech spyware installed on my computer.
Changing the button requires soldering and deep disassembly.
For a 120$USD mouse this sucks !Using cheap switches on high end stuff like this is just abominable. I’d somewhat understand it on a cheap model but this… fucking hell.
How else would they still stay in business if I could just use that mouse for the next 10 years !
If it only was merely aboit staying in business… instead it’s all about growing profits. They made $613M on $4.3B last year.
Chatgpt, give me the most business answer possible with airtight logic that eliminates the possibility of imagining a different way.
Chatgpt :
Logitech, like any publicly traded company, exists to maximize shareholder value, not product longevity, so using cheaper switches—even in a $120 mouse—isn’t corner-cutting, it’s strategic. A $0.10 upgrade per unit sounds trivial, but across millions of units it erodes margins significantly, and more durable components risk extending the product lifespan beyond the optimal refresh cycle, cutting into predictable repeat sales. Making switches hard to replace and binding functionality to proprietary software isn’t anti-consumer—it’s deliberate lock-in that ensures brand dependency and data capture, both of which are monetizable assets. With shareholders expecting year-over-year growth, not stability, any move that delays repurchase or encourages repair undermines the core business model. The $613M profit on $4.3B revenue isn’t greed—it’s the result of a finely tuned system where every design and pricing decision serves one purpose: sustainable, scalable profitability.
